After the OnePlus 7T series launch, OnePlus must be prepping for its next-generation smartphones i.e. OnePlus 8 series. We have already seen the first renders of OnePlus 8 earlier this month. Now, OnePlus 8 Pro renders have been surfaced online revealing key details like quad-camera setup at the back and punch hole design at the front.
The leaked renders of the alleged OnePlus 8 Pro, courtesy of 91Mobiles are similar to the OnePlus 8 ones with similar punch-hole display. So, it looks like even the Pro model will be coming with an in-display selfie camera in place of a pop-up module. Moreover, it will also be the first smartphone by OnePlus to offer a quad-camera setup on the back.
OnePlus 8 Pro Leaks
Starting with the front, the OnePlus 8 Pro design will be similar to OnePlus 8, with the punch-hole display. However, the screen size will be a little bigger at 6.65-inch, up from the 6.5-inch for the OnePlus 8. However, it will be a bit smaller than the 6.67-inch panel on the 7T Pro. The 90Hz refresh rate for all OnePlus phones’ display has already been confirmed.
Coming to the back panel, there are three cameras in vertical alignment with a 3D ToF sensor next to it along with some other camera sensors. The LED flash sits below the three camera sensors. The Alert Slider and Power button are on the right side, while the Volume buttons are on the left side.
At the bottom, there is a USB Type-C port and a redesigned speaker grille, similar to the OnePlus 8 renders. The top edge has a mic and the pop-up module has gone, thanks to the punch-hole design. As per leaks, the OnePlus 8 Pro measures 165.3 x 74.4 x 8.8mm.
We don’t know about the hardware and other specifications yet. However, in terms of camera, the additional 3D ToF camera may be used for any of the features like 3D photography, and AR, etc. The OnePlus 8 series may also come with 5G support.
These are only the early renders and there is nothing official as of now so you should take this with a pinch of salt.